CLLA2050N
Lighting (DS)
What does it mean for a product to be LISTED to UL standards?
A product that has the listing mark of UL, ETL or CSA means that the entire product and all of its components have been tested as they are used in connection with one another. This means that the entire product meets the applicable UL standard -- not just one or some of the components (like the power supply or electrical cord).
Testing is completely documented in a testing report. The components used are listed in the report and are essentially registered for the applicable product. Assembly factories are subject to unannounced inspections to assure ongoing compliance with the testing reports.
What is the difference between the ETL, CSA and UL Marks?
Each is a separate testing organization, and certification marks –ETL, CSA or UL Listed Mark –- demonstrate compliance to widely accepted product safety standards. All three are recognized as NRTLs in the U.S. and, in a similar capacity, as a testing organization and certifying body in Canada by the Standards Council of Canada. Interestingly, Canada has legislation requiring products being sold to be listed to the UL standards.
Why do some products have the ETL or CSA marks and others have the UL Mark?
All three organizations test to the exact same standard. One of the key decisions in choosing whom to use is that testing through ETL or CSA for potential listing tends to be faster than UL's timeframe. Quite simply, the quicker one can complete testing, the sooner they can bring a recognized and listed product to market.
Why should I really care if a product is listed with UL, ETL or CSA?
Using products that are proven to be safe when used as intended would be important not just for the safety of our own customers, but for the safety of all of those participating in an event. Secondly, comes the concern of liability. If damage occurs from the use of a product that is not listed with UL, ETL or CSA, there is a significantly higher degree of negligence and potential liability.
Documentation for CLLA2050N
Frequently Asked Questions
- What if I have a question and want assistance with designing a lighting setup for a project?
Give us a call or send us an email with the details of your project and a description of the lighting effects you desire - using Contact Us located on every Product Detail page. We will respond promptly.
- What should be considered when selecting the type of lighting to use in a space?
The type(s) of lamp that you select depends on the effect that you want to deliver. Color temperature, or chromaticity, influences the mood of the space you are lighting. It is measured by “Kelvin Range” or “Temperature” and is sometimes called Color Rendering Index (“CRI”). To understand color temperature, think of a flame from a butane torch. The red/orange outer flame is the color generated at a certain temperature. The next hottest layer is the white portion of the flame. The hottest section of the fame is blue.The best bet is to discuss the project with us, and we can then guide you in the selection process. - What is the influence of color temperature on mood?
The following are general accepted guidelines:- Kelvin Range 3000K – Friendly, Intimate, Personal
- Kelvin Range 3500K – Friendly Inviting, Non-threatening
- Kelvin Range 4100K – Neat Clean, Efficient
- Kelvin Range 5000K+ – Bright, Alert, Exacting
Give us a call or send us an email if you have any questions about the appropriate lighting for your exhibit.
- How versatile is Track Lighting?
It is an extremely versatile lighting system. The individual track heads can be positioned anywhere along the track, be swiveled or rotated while in a given position, and then aimed in any direction.This provides excellent versatility to change your lighting scheme whenever the need arises. - Can LEDs be used to provide general illumination?
Yes they can! As with any newer technology, please be prepared for a higher price point when using LED technology.
- What are some of the advantages of using LED bulbs compared to incandescent bulbs
LED light bulbs use less energy and throw off less heat than their incandescent counterparts.LED light bulbs are also available in a variety of color temperatures ranging from warm white to neutral white to cool white.We have more LED lights available than shown online. Give us a call or send us an email. - Why do you only sell Velcro brand hook and loop tapes and products?
The answer is quality!In our experience the high quality adhesives and manufacturing process used by Velcro® stand up best to the ranges of temperature and humidity that shipments are exposed to over the road and in marshaling yards.Using Velcro® brand products assures that the products will work as intended when unloaded from a trailer and installed in a trade show or retail venue. - What are some general safety guidelines that should be kept in mind when choosing bulbs and power sources for lighting fixtures?
Using products that are either UL or ETL listed eliminates most every question. These symbols mean that the manufacturers produce products according to widely accepted UL safety standards. Products that are UL or ETL approved are subject to quarterly unannounced inspections at the manufacturing sites to assure that safety matters and manufacturing processes are being adhered to.We have a broad selection of replacement bulbs than those shown online. Give us a call or send us an email for more information.
Add designs and photos to your personal gallery simply by clicking on the +My Gallery links
Then email your "My Gallery" to colleagues, friends, or your favorite exhibit designer. There's no better way to begin designing a display that reflects your exhibit marketing goals.
Note: My Gallery uses a temporary browser cookie to store your gallery. We recommend that you send your gallery to your email address if you need to retain it for longer than 30 days.
- Suggested lead times may vary depending on current orders. Please check with Customer Service.
- Production lead times are based on business days and DO NOT include any shipping days.
- Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
- No order will be released to Production without a signed order confirmation.
- Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
- Standard lead times do not apply to orders of multiple quantities.
- Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
- Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
- Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
- Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
- Inline vs. Island Displays
- Lead Retrieval Devices
- Computer and Monitor Cables
- Demo Equipment
- Overhead Lighting
- Grommets and Grommet Placement in Counters
- Overhead vs. Floor Power Supply
- Flooring and Electrical Wiring
- Options for Hiding Cords and Cables
- Flat vs. Round Electrical Cords
- Multi-Plug Outlets and Extension Cords